Home » Products » Hydraulic Hose » Hydraulic Hose, SAE 100R1 AT/EN853 1SN

Hydraulic Hose

SAE 100R1 AT/EN853 1SN
Steel Wire Braid Hydraulic Hose SAE 100R1 AT/EN853 1SN

Construction: This SAE 100R1 hydraulic hose consists of an inner tube of oil-resistant synthetic rubber, a single steel wire braid reinforcement, and an oil and weather-resistant synthetic rubber cover.

Recommended For: Medium pressure hydraulic lines. Meets or exceeds the requirements of SAE 100 R1 Type AT and performance requirements of EN 853 1SN.

Temperature Range: -40℉ to +250℉ (-40℃ to +121℃)

Application: This steel write braid hydraulic hose is used with petroleum-based hydraulic fluids in a temperature range of -40℃ - +100℃. The hydraulic rubber tube has a burst pressure ranging from 10.5Mpa to 84Mpa.

specification:
SAE 100 R1 1AT
Item Code Hose ID Hose O.D. Working Pressure Min. Burst Pressure Min. Bend Radius Weight
Inch mm Inch mm psi MPa psi MPa Inch mm kg/m lb/ft
R1-06 1/4 6.4 0.52 13.1 2785 19.2 11165 77 3.94 100 0.25 0.168
R1-08 5/16 7.9 0.58 14.7 2535 17.5 10150 70 4.53 115 0.31 0.208
R1-10 3/8 9.5 0.67 17.1 2275 15.7 9135 63 4.92 125 0.36 0.242
R1-13 1/2 12.7 0.8 20.3 2030 14 8120 56 7.09 180 0.45 0.302
R1-16 5/8 15.9 0.92 23.4 1525 10.5 1740 42 7.87 200 0.52 0.349
R1-19 3/4 19.1 1.08 27.4 1260 8.7 5075 35 9.45 240 0.65 0.437
R1-25 1 25.4 1.4 35.5 1015 7 4060 28 11.81 300 0.91 0.611
R1-32 1 1/4 31.8 1.69 43 625 4.3 2540 17.5 16.54 420 1.3 0.874
R1-38 1 1/2 38.1 1.95 49.5 510 3.5 2030 14 19.69 500 1.7 1.142
R1-51 2 50.8 2.48 63 375 2.6 1525 10.5 24.8 630 2 1.344
EN853 1SN
Item Code Hose ID Hose O.D. Working Pressure Min. Burst Pressure Min. Bend Radius Weight
Inch mm Inch mm psi MPa psi MPa Inch mm kg/m lb/ft
1SN-06 1/4 6.4 0.52 13.1 3275 22.6 13100 90.3 3.94 100 0.25 0.168
1SN-08 1/3 7.9 0.58 14.7 3125 21.5 12500 86.2 4.53 115 0.31 0.208
1SN-10 3/8 9.5 0.67 17.1 2600 17.9 10400 71.7 4.92 125 0.36 0.242
1SN-13 1/2 12.7 0.8 20.3 2325 16 9300 64.1 7.09 180 0.45 0.302
1SN-16 5/8 15.9 0.92 23.4 1900 13.1 7600 52.4 7.87 200 0.52 0.349
1SN-19 3/4 19.1 1.08 27.4 1525 10.5 6100 42.1 9.45 240 0.65 0.437
1SN-25 1" 25.4 1.4 35.5 1275 8.8 5100 35.2 11.81 300 0.91 0.611
1SN-32 1 1/4 31.8 1.69 43 925 6.4 3700 25.5 16.54 420 1.3 0.874
1SN-38 1 1/2 38.1 1.95 49.5 725 5 2900 20 19.69 500 1.7 1.142
1SN-51 2 50.8 2.48 63 600 4 2700 18.6 24.8 630 2 1.344
1SN-38 2 1/2 63.8 3.03 77 360 2.5 1600 11 29.92 760 2.56 1.72
1SN-51 3 76 3.46 88 290 2 1160 8 34.65 880 2.74 1.841
product show
Production process

Raw Material:
Imported LG NBR rubber from South Korea and BELKTA steel wire with high tensile strength 2750Mpa from Belgium.
Good quality materials make our hydraulic hose steady performance, good decentrality and excellent oil resistance.

Factory Workshop:
Our factory introduces advanced technology and equipment to make the best quality hydraulic hose.
Our bunching Machine is SEJIN MACHINE from Korea.
High consistency, suspension difference < 70MM,the international standard is 120MM.
We use Mitsubishi electric control braiding machine

Packaging

After finishing the Hydraulic Hose production, we will pack the hose. In general, the packing will use woven bag and plastic film. Special packing is available according to customers’ requirements

Our company
Certificates
Market & Trade show
Inquiry Form